High pressure cooling ![]()
High pressure cooling
The spray cooling system allows to reduce the air temperature in livestock house easily and economically
A special pump pumps water through pipes to nozzles which, through a small hole (0.2 - 0.3 mm) and at a high pressure of 70 bar, spray it in air as a water mist
Water immediately evaporates at high temperatures in the building - absorbs dust, moisturizing and cooling the air, effectively improving the climate in area occupied by animals
The best cooling effect is achieved when the air humidity is low and the ventilation is working well
Construction
The system consists of standard elements that can be easily adapted to the building:
- pumps with accessories
- fogging nozzles
- 6m long stainless steel pipes to distribute water along the building
- system of connectors
- mounting brackets and suspension brackets
The water is distributed in pipes along the walls of the building and/or suspended from the ceiling in one or more lines (recommended for wide buildings)
The cooling system can be controlled by the microclimate computer
Installation of nozzles
Nozzle mounting holes can be made anywhere with a special tool (product code: 5230) after the pipes have been installed. That allows to install the nozzles in the most optimally points
To receive the best cooling effect is to install the nozzles above the air inlets and shutters, because the water mist from them to immediately cool down the air flowing into the building
Pumps
Pump 720T
Capacity of 12 l/min at 70 bar
Product code: 5290
Maximum connection capacity: 120 nozzles
Recommended number of nozzles: 95-110 to maintain proper system pressure and allow for pressure losses in the installation
Pump 1260T
Capacity of 21 l/min at 70 bar
Product code: 5291
Maximum connection capacity: 210 nozzles
Recommended number of nozzles: 170–190 to maintain proper system pressure and allow for pressure losses in the installation
Fogging nozzles
1. 0.3mm nozzle with pipe
Capacity at 50bar=5.5l/h, 70bar=6.5l/h
5253-06 — nozzle with stainless steel insert
5253-30 — nozzle with porcelain insert
2. 0.2mm nozzle
Capacity at 50 bar = 3.5 l/h,70 bar = 4 l/h
Product code: 5253-01
3. 0.3mm nozzle
Capacity at 50bar = 5.5l/h, 70bar = 6.5l/h
Product code: 5253-03
Water distribution system along the building
With pipes fi 12mm, 6m long
Made of stainless steel
Product code: 5265
Wall-mounted or suspended from the ceiling
Mounting bracket
PVC mounting bracket - fi 12mm
For mounting pipes to the wall every 60 cm
Product code: 5266-01
Suspension
On profile fi 27mm, 3m long
Made of galvanized steel
Product code: 5252
and with hangers for suspension profile Ø26.7mm and for fogging pipes Ø ¾"
Product code: 5252-01
System of screwed connectors fi 12 mm
1. Galvanized in-line valve — Product code: 5272
+ 2 × galvanized L12 ring (product code: 5274)
+ 2 × galvanized M12 nut (product code: 5275)
2. Complete stainless steel T-fitting
Product code: 5273-10
3. Complete stainless steel elbow fitting
Product code: 5271-10
4. Complete stainless steel straight connector
Product code: 5270-10
System of clamp connector fi 12mm
1. Galvanized port valve
Product code: 5264
2. Stainless steel T-fitting
Product code: 5273-01
3. Stainless steel elbow fitting
Product code: 5271-01
4. Stainless steel straight connector
Product code: 5270-01
5. ¼"x12mm galvanized end valve
Product code: 5263-01
CONTACT
info@bestfeeder.eu
